Ontworpen door easysea

Rope Deflector, beschermsysteem voor patrijspoorten en leiogen

Ontworpen door easysea

Rope Deflector, beschermsysteem voor patrijspoorten en leiogen

Aanbiedingsprijs€19,00 EUR Normale prijs€25,00 EUR
Bestseller
Summer Sale-prijs --:--:--

Deze prijs geldt tot 31 augustus. Op 1 september geldt weer de adviesprijs.

Hoeveel heb je nodig?

Op voorraad

Verwachte levering: vr 25 sep – ma 28 sep

Veilige transactie Verkocht door easysea®

Before you order

  • Hoe monteer ik het?
    Maak het oppervlak goed schoon, trek de 3M-kleeffilm eraf en druk de deflector op de hoek van de patrijspoort. Geen boren, geen gereedschap.
  • Blijft de kleeflaag lang zitten?
    Ja: de 3M-kleeflaag is ontwikkeld voor gebruik buiten op zee en is bestand tegen water, zout en uv. Maak het oppervlak vooraf wel goed schoon.
  • Wat zit er in een pakket?
    2 bij elkaar passende siliconen hoeken: de complete kit voor één patrijspoort.
  • 3-year warranty
    Full cover on material and manufacturing defects. No registration needed. With easysea +care you add 3 more years, 6 in total.
  • 30-day returns
    If it is not right you send it back, even fitted. Full refund.
  • Tracked shipping
    Tracking on every order. Free shipping over €399 .
  • Het probleem, opgelost
  • Geen boren, geen gereedschap
  • Eén set, één patrijspoort

Je beheert het haakpunt niet: je haalt het weg

De schoot blijft nooit meer haken

  • 01

    Het probleem, opgelost

    Bij een manoeuvre telt elke seconde: een lijn die onder het luik vastzit betekent verlies van controle en risico op schade. Het parabolische profiel laat hem eroverheen glijden.

  • 02

    Geen boren, geen gereedschap

    3M-kleeflaag: oppervlak schoonmaken, folie eraf, aandrukken. Klaar met monteren.

  • 03

    Eén set, één patrijspoort

    Twee bij elkaar passende, gevormde hoekjes van mariene siliconen die beide randen van een patrijspoort op het voordek bedekken. Jarenlang UV- en zoutbestendig.

Van probleem naar volledige vloeiendheid

Einde van de ellende
01

Einde van de ellende

Geen schoten meer die onder de hoek van de patrijspoort vastlopen bij overstag gaan en gijpen.

Volledig vloeiend
02

Volledig vloeiend

Het parabolische ontwerp haalt het haakpunt fysiek weg: de lijn glijdt zonder haperen over het siliconen oppervlak.

Op maat voor patrijspoorten
03

Op maat voor patrijspoorten

Het profiel volgt de hoek van de patrijspoort: discreet, laag, vlak met het dek.

Onder echte belasting
04

Onder echte belasting

De schoot komt op spanning en loopt door: de siliconen leiden hem zonder het gelcoat te beschadigen.

Technische specificaties

RubbermateriaalSilicone
HardheidShore 80A
WeerstandUV-straling en zout water
Afmetingen (L x H)122 x 22 mm
Binnen-/buitendiameterØ 45 / 62 mm
Max. hoekradiusØ max 45 mm
Gewicht25 g
Aanbrengtemperatuur10-38 °C (ideaal 20-38 °C)
SKUROD-101

Vragen voordat je bestelt

Hoe monteer ik hem?
Maak het oppervlak goed schoon, trek de 3M-kleeffolie eraf en druk de deflector op de hoek van de patrijspoort. Geen boren, geen gereedschap.
Bij welke temperatuur moet ik hem aanbrengen?
3M VHB-tape werkt het best tussen 20 en 38 °C. Aanbevolen minimum: 10-15 °C. Onder 10 °C wordt de kleeflaag te stijf, bevochtigt hij het oppervlak niet goed en is de verbinding minder sterk. Breng hem ook niet aan boven 38 °C.
Houdt de kleeflaag op lange termijn?
Ja: de 3M-kleeflaag is ontwikkeld voor mariene buitentoepassingen en is bestendig tegen water, zout en UV. Maak het oppervlak alleen goed schoon voor het aanbrengen.
Wat zit er in een pakket?
2 bij elkaar passende siliconen hoekjes: de complete kit voor één patrijspoort.
Wanneer wordt hij verzonden?
Hij is op voorraad: bestellingen worden binnen 2 werkdagen verwerkt en verzonden.
Hoe zit het met de garantie?
3 jaar garantie op fabricagefouten, plus 30 dagen niet-goed-geld-terug.

Customer Reviews

Overall rating: 4.5 / 5 from 40 reviews.

Customer photo review of Rope Deflector – Porthole Fairlead Protection System

I have lewmar 30 and 60 hatches on my moody 336. Like many boats with these hatches, the deck slopes away from the hatch base and the non slip grp begins close to the hatch base. Two problems; 1.. the curve of the deflector is not compatible with the corner curve of this popular hatch and the slope means the deflector angles away from the hatch. 2.. the proximity of the non slip surface to the hatch means that the 3m vhb tape is unlikely to grip. For me this has been a waste of money . Also a significant delivery charge and some delivery delays and communication problems.

Rope Deflector – Porthole Fairlead Protection System

Store owner replied: Hi, we’re sorry the Rope Deflector wasn’t suitable for your setup. The product images on our website show a Lewmar Low Profile 44; in your case, the main issue seems to be the limited smooth surface available for the adhesive. Our customer care replies within 24 hours, while shipping costs are set by the couriers and we already cover part of them for non-EU deliveries. We’re launching a larger version and would be happy to send you one free of charge.

Customer photo review of Rope Deflector – Porthole Fairlead Protection System

Hi, Problem solved ! Before we used to put an elastic around our hatch always afraid to forget to put it on. Stress gone ! Thx for the good tip ! We will be sure to spread the word :-) Michel S/Y TEQUILA

Rope Deflector – Porthole Fairlead Protection System

Store owner replied: Thank you Michel! So happy to hear the Rope Deflector solved the problem and took the stress away. Enjoy sailing on S/Y TEQUILA! ⛵️

We’re actually waiting for the weather to warm up for us to install it so I had to score 4 out of five hoping it’s gonna work really well! We feel it’s a little bit too chilly right now. Is there an actual temperature that it’s appropriate to put on?

Rope Deflector – Porthole Fairlead Protection System

Store owner replied: Yes, temperature does make a difference during installation. For 3M double-sided tapes, including VHB, the ideal application temperature is between 20°C and 38°C. We would recommend avoiding installation below around 10–15°C, as the adhesive can become too stiff to bond properly to the surface. After application, it’s best to allow around 72 hours for the adhesive to reach its full bond strength. Once fully bonded, the tape can withstand a much wider temperature range, approximately from -40°C to +70°C.

product is ok, but the corners on my hatch have a much larger radius than the protectors, so I needed to bend the protectors further open. Despite cleaning the gelcoat with acetone and leaving 24 hours after sticking down, the glue has not stuck well. It's an expensive product to be semi-successful.

Rope Deflector – Porthole Fairlead Protection System

The angle on the moon is something less than 90 degrees so that when the points touch the hatch there is a gap between the center of the moon wedge and the hatch; however it works as advertised if not perfectly matched to the rounding of the hatch.

Rope Deflector – Porthole Fairlead Protection System

Shipping was fast! The "lip" surface around my hatch is smaller and a different shape than the rope deflectors. So I had to "form" the deflectors to fit. Otherwise installation was straight forward and easy. Time will tell if they stay attached to the fiberglass because of the side force from my shaping them to fit. I have no doubt that they will prevent the sheets from jamming under the hatch cover.

Rope Deflector – Porthole Fairlead Protection System

Dispatched quickly but UPS then slowed down and "delivery by Friday " became the following Monday. I like the concept of the protectors, however we have a small hatch causing problems which needs a smaller radius. Also our deck doesn't have enough flat area for a proper fit adjacent to the hatch. I assume it works well with many vessels, but sadly not ours.

Rope Deflector – Porthole Fairlead Protection System

These work very well. We have used them to deflect trims on the forward hatch of two sailboats.

Rope Deflector – Porthole Fairlead Protection System

Store owner replied: Thank you. Great to hear they worked well on both boats and helped with the forward hatch setup. ⛵️

By far the most common hatch is the Lewmar Ocean Series. The rope deflector was designed around a hatch with a much larger corner radius. The deck on our boat was designed with only a small section of smooth surface around the hatch so the deflector did not fit well. I bent the deflector to match the radius of the hatch and to adhered it to the deck. It had to be bent quite a bit and I am concerned about long term ability of the adhesive to hold it into the distorted shape. Otherwise it looks like a great design. Perhaps providing more information on your site about the radius of the presenter and what is allowable bending to fit. Also offering an addition version with a smaller radius for ports and other hatch designs would be helpful.

Rope Deflector – Porthole Fairlead Protection System

For years I tried to solve the problem of the sheets getting stucked around tthe portholes ! I have tried several different solutions , but nothing has shown as efficient as yours

Rope Deflector – Porthole Fairlead Protection System

Summer Sale · 15 → 31 augustus

Summer Sale.

Summer Sale-prijzen op de hele catalogus. Korting al toegepast, geen code nodig. Op 1 september gaat alles automatisch terug naar de adviesprijs.

--
Dagen
--
Uur
--
Min
--
Sec
Bekijk de aanbiedingen